3D Scanning and Scan to CAD in Seattle
A physical part in, CAD-ready geometry out. For reproducing, modifying or archiving parts no catalog still lists.
A real part, scanned here
The rear subframe of a Triumph Street Triple, captured and cleaned in-house.
From part to CAD
Each stage is something you can open and check.
- Raw captureThe part is scanned from several sides into a dense point cloud. You can see the raw capture of our subframe as it came off the scanner.
- Clean meshNoise removed and holes closed, into a watertight mesh. See the cleaned mesh.
- CAD-readyGeometry you can modify, reproduce or archive in your CAD tool.
What it’s for
Parts that exist only as the object in your hands.
Out-of-production parts you need to reproduce, a custom bracket you want to modify, a prototype you need to measure, or a one-off you want archived before it wears out.
This is prototype work by a non-licensed practice: a pipeline demonstration, not inspection or certification. When a part needs certified measurement or a stamped design, we’ll tell you so.
Questions
What do I get at the end?
A cleaned, watertight mesh and CAD-ready geometry of your part, plus the raw capture if you want it.
What does it cost?
It depends on the part’s size and detail, so we look at it first and quote one fixed price before we start.
Is this certified inspection?
No. It’s non-licensed prototype work, not inspection or certification. We’ll say plainly when a job needs a licensed professional.
Have a part you need in CAD?
Send a photo and a sentence about it. A person reads every message.